GRE RBR120 Instruction Manual page 4

EN
POWER ON
Pipe air out
1. Turn on the switch, the indicator lights up, put
the robot horizontally into the pool, and wait for
the robot to sink freely down to the pool bottom,
it takes around 20-30 seconds to pipe air out
first.
3.
A hook is with the
3.
A hook is with the
machine, it can be
machine, it can be
easily to hooked up
easily to hooked
the cleaner.
up the cleaner.
GARBAGE DISPOSAL
1.
2.
2. When the robot has no
power, it will automatically
stop at the edge of the
pool. (may also get stuck in
the middle of the pool by
obstacles)
Note:
1. It is recommended that the filtration system be
turned off as the water circulation in the pool
may affect the robot's motion mode.
2. Any obstacle in the swimming pool such as
a ladder will affect the robot's crawling and
cleaning track.
3. If you are using a brine tank, make sure that all
the salt is dissolved before putting the robot into
the water.
3.
4.
Filter cleaner Filter cleaner
(not included into)
(not included into)