Table of Contents
Advertisement
2. Remove the
SIM
card.
3. Remove the
base
cover.
4. Remove the
4G WWAN card
5. Remove the
WLAN
card.
6. Remove the
memory
modules.
7. Remove the
M.2 2230
8. Remove the
M.2 2230 solid-state drive from Slot
9. Remove the battery.
10. Remove the
assembly-inner
11. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
12. Remove the
display
assembly.
13. Remove the
smart-card
14. Remove the
fingerprint
About this task
NOTE:
When replacing the palmrest assembly, transfer the dummy SIM filler to the new palmrest assembly.
The following images indicate the location of the palm-rest assembly and provide a visual representation of the removal
procedure.
or
5G WWAN
card, as applicable.
or
M.2 2280
solid-state drive from Slot 1, as applicable.
frame.
reader, if applicable.
reader, if applicable.
2, if applicable.
Removing and installing Field Replaceable Units (FRUs)
127
Advertisement
Table of Contents
