Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CARLO GAVAZZI EM511DINAV81XM1PFB
Summary of Contents for CARLO GAVAZZI EM511DINAV81XM1PFB
- Page 1 EM511 Energy analyzer for single-phase systems USER MANUAL 18/10/2023...
-
Page 2: Table Of Contents
Digital input Digital output (version O1) Modbus RTU port (version S1) M-Bus port (version M1) Essential information Alarms Introduction Variables Alarm types DMD values Average value calculation (dmd) Integration interval EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 3: This Manual
This manual is an integral part of the product and accompanies it for its entire working life. It should be consulted for all situations tied to configuration, use and maintenance. For this reason, it should always be accessible to operators. NOTICE: no one is authorized to open the analyzer. This operation is reserved exclusively for CARLO GAVAZZI technical service personnel. -
Page 4: Em511
M-Bus communication port. Description Figure 1 EM511 Area Description Voltage inputs/Current inputs DIN - rail mounting bracket Display Digital input, digital output and communication connections Sealable covers Browsing and configuration buttons EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 5: Available Versions
Defining the setup with energy non connected, then applying it later (offline setup) Displaying the main measurements Displaying the state of inputs and outputs Displaying the state of the alarms Recording the measurements of selected variables EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 6: Use
» RESET: pages allowing to reset the partial counters and the dmd calculation, or to restore the factory settings Push buttons Button Action Next page Increase value Home/previous menu (long press >3 s) Enter menu Confirm EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 7: Menu Overview
Menu Overview EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 8: Measurement Page
COMMUNICATION: reading or writing command is addressed to EM511 serial communication state (reception / transmission) Total ON time Partial meters Exported energy (kWh-) Imported energy (kWh+) Unit of measurement EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 9: Setup Menu
INFO menu Part Description Parameter Value Button Action Next parameter Enter / exit RESET menu Part Description Sub-menu title, see “RESET menu” Selection (YES/NO) Button Action Next option Confirm EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 10: Commissioning
QUICK SETUP menu LAtEr skip the procedure and display the QUICK SETUP menu at the next switch-on Note: the available parameters depend on the model. EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... - Page 11 S1 models Example 1: confirmation Example 2: modification (address 4, parity EVEN, baudrate 19.2 kbps) EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA...
- Page 12 M1 models Example 1: confirmation Example 2: modification (primary address 1) EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA...
- Page 13 O1 models Example 1: confirmation EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA...
- Page 14 Example 2: modification (pulse kWh+, duration 100 ms, 10 pulses/kWh) EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA...
-
Page 15: Menu Description
Exported active energy Not available in PFA and SFA kWh- PAR (PARTIAL) models Run hour meter (exported Not available in PFA and SFA h (kWh-) PAR energy, PARTIAL) models EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 16: Settings Menu
Monitored variable kW Kvar SEt 1 Set point 1 -1000.00 to 1000.00 (activation) Set 2 Set point 2 -1000.00 to 1000.00 (deactivation) dELAY Activation delay 0 to 1000 s EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 17: Info Menu
Output pulse weight ALArM Alarm enabling Linked variable SEt 1 Alarm activation set point SEt 2 Alarm deactivation set point dELAY Alarm activation delay LIGHt Backlight timer CHECKSuM Firmware checksum EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 18: Reset Menu
Direction of the input Current direction X*** current Tariff selection Tariff selection Dedicated register for Pages cfg each Real time page to configure the visibility EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... - Page 19 * = Read-Only on MID models ** = Home page can be set only to 1 in PFA and SFA and between 1 and 2 on PFB *** = Not available on MID models EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA...
-
Page 20: Input, Output And Communication
For further information about Modbus RTU communication refer to the communication protocol. M-Bus port (version M1) M-Bus communication port is used to transmit data to a M-Bus master (Carlo Gavazzi SIU-MBM or any third party M-Bus master). For further information about M-Bus communication refer to the communication protocol. -
Page 21: Essential Information
The alarm activates when the monitored variable exceeds the Set 1 value for a time equal to the activation delay (Delay) and deactivates when the values drops below Set 2. Set 1 Set 2 Delay EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 22: Dmd Values
EM511 is equipped with a backlight system. You can set whether the backlight shall always be ON or whether it should automatically switch off after a given interval has elapsed since a button was pressed (1 to 60 minutes). EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 23: Screensaver
Notes: this function is available only for non-MID models. EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... - Page 24 Example: follow the diagram below if you want to set the target values that you find in the table: Energy meters Values kWh+ 100 000.00 kWh- 200 000.00 kvarh 300 000.00 kvarh- 200 000.00 kvah 200 000.00 EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA...
-
Page 25: Tariff Management
Tariff 1 Tariff 2 Tariff management via M-Bus To manage tariffs via M-Bus, a specific frame can be sent by the M-Bus Master M-Bus value Tariff Tariff 1 Tariff 2 EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... -
Page 26: Maintenance And Disposal
Maintenance and disposal Troubleshooting Note: in case of other malfunctions or of any failure, please contact the CARLO GAVAZZI branch or the distributor for your country Problem Cause Possible solution The ‘EEEE’ indication is displayed The analyser is not used within the... -
Page 27: Download
Dispose of the unit by separately collecting its materials and bringing them to the facilities specified by government authorities or by local public bodies. Proper disposal and recycling will help preventing potentially harmful consequences for the environment and for people. EM511 - User manual | 18/10/2023 | CARLO GAVAZZI Controls SpA... - Page 28 CARLO GAVAZZI Controls SpA via Safforze, 8 32100 Belluno (BL) Italy www.gavazziautomation.com info@gavazzi-automation.com info: +39 0437 355811 fax: +39 0437 355880 EM511 - User manual 18/10/2023 | Copyright © 2023...
Need help?
Do you have a question about the EM511DINAV81XM1PFB and is the answer not in the manual?
Questions and answers