Getting Started - Rowenta CURL ACTIV Manual

D. Temperature switch (2 settings)
E. Heat-resistant tip
F. Rotation buttons right / left
G. Hanging ring
H. Counter rest
I. Clip release handle
J. Swivel power cord
K. Pouch

3. GETTING STARTED

- Place your curling iron on a safe flat surface, with the counter rest ex-
tended.
- Plug it into a power outlet.
- Select the right temperature setting for your hair: use the setting
MEDIUM if your hair is fragile or fine – setting HIGH if your hair is thick
and healthy.
TIP: Setting MEDIUM is strongly recommended for first time use.
Your iron will be ready to use in 90 seconds.
Warning: Keep in mind that your iron will take time to cool. To avoid
risk of burns, do not touch the barrel. The iron will be safe to handle
after about 20 minutes.
4. HOWTO USE YOUR: Curl Active Iron
Follow these easy steps to achieve gorgeous curls.
PREP:
• Make sure that your hair is completely dry before starting to use your
iron.
• Do not use this appliance on synthetic hair (wigs, extensions, etc.)
• Use a wide-tooth comb to untangle your hair.
• For best results, part your hair into sections. This will make it easier to
select 1,2" wide strands of hair when using your iron.
CURL:
• Press the rotation button in the left or right direction in order to bring
the clip around so it faces you, then stop the rotation.
• Open the clip by pressing on the curl release handle.
• Place the end of a 1" strand of hair between the clip and the barrel.
TIP: If you prefer, you can also place your hair between the clip and
barrel, starting halfway down the length, then gently gliding the iron
down to the tips.
• Release the clip onto the barrel using the handle. Your hair is ready to
be curled.
• Press the rotation button – the hot barrel will then start rotating and