Using The Monitor; Setting The Timing Mode; Osd Lock Settings - ViewSonic P90F User Manual

Using the Monitor

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The timing mode consists of the
resolution (example 1024 x 768) and refresh rate (or vertical frequency;
example 75 Hz). After setting the timing mode, use the OnView
to adjust the screen image.
For the best picture quality set your monitor timing mode to:
VESA 1280 x 1024 @ 85 Hz.
To set the Resolution:
Right-click on the Windows desktop.
1
Click Properties on the drop-down menu.
2
Click the Settings tab.
3
Move the slider pointer which displays in the Desktop area or Screen area in
4
the window.
NOTE: The refresh rate should already be set if you have done the CD
installation (or refer to your graphics card documentation).

OSD Lock Settings

You have the option of using the OSD Lock feature to prevent current image
adjustments from being changed.
• OSD Lock: Press and hold [1] and [
pressed the message OSD Locked will display for 5 seconds.
• OSD Unlock: Press and hold [1] and [
J 
] for 10 seconds. If any buttons are
J 
] again for 10 seconds.
ViewSonic
controls
®
P90f 5