Audio Output Settings (Apple Carplay & Android Auto) - Aerpro AM7 CPAAM User Manual

Audio output settings (Apple CarPlay & Android Auto)
The 'BT Audio' feature allows you to use the CarPlay/Android Auto
features on the display whilst streaming audio to your factory audio
system over bluetooth if supported.
1. Make sure that the 'BT Audio' feature is selected.
2. Then connect your device via Apple CarPlay/Android Auto to the
7 inch monitor using the instructions in this manual.
3. Once your phone is connected, your device will automatically
disconnect to the bluetooth from the 7 inch monitor. You must
then connect your smartphone to the head unit's bluetooth.
Once connected, audio from Apple CarPlay/Android Auto will
start playing through your vehicle's factory sound system over
bluetooth.
NOTE: You can also adjust the bluetooth volume from your phone
using this method. Not all factory/aftermarket head units will support
this feature and you may encounter disconnections or poor audio
quality depending on your vehicle/device.
Music may not automatically start playing in this mode and may
need to be played manually. We do not recommend this feature for
head units that support Wireless CarPlay or Wireless Android Auto.
6