Error Messages; Beep Errors - Lenovo ThinkPad P17 Gen 1 Hardware Maintenance Manual

Table 2. Numeric error codes (continued)
Symptom or error
2111
Read error on SSD0 (M.2)
Read error on Storage Device0 (M.2)
2112
Read error on SSD1 (M.2)
Read error on Storage Device1 (M.2)
2113
Read error on Storage Device2 (M.2)
2200
Machine Type and Serial Number are invalid.
2201
Machine UUID is invalid

Error messages

Table 3. Error messages
Symptom or error
Fan error.
One fan error.
Thermal sensing error.
The non-volatile system UEFI variable storage is nearly
full.
The battery installed is not supported by this system and
will not charge. Please replace the battery with the correct
Lenovo battery for this system. Press the ESC key to
continue.
This system does not support batteries that are not
genuine Lenovo made or authorized. The system will
continue to boot, but may not charge unauthorized
batteries. Press the ESC key to continue.
Attention: Lenovo has no responsibility for the
performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out
of their use.

Beep errors

Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black
screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep
technology, do the following:
1. Go to
https://support.lenovo.com/smartbeep
FRU or action, in sequence
1. Reseat the M.2 solid-state drive.
2. Replace the M.2 solid-state drive.
3. Replace the system board.
1. Reseat the M.2 solid-state drive.
2. Replace the M.2 solid-state drive.
3. Replace the system board.
1. Reseat the M.2 solid-state drive.
2. Replace the M.2 solid-state drive.
3. Replace the system board.
Replace the system board.
Replace the system board.
FRU or action, in sequence
1. Replace the fan.
2. Apply thermal grease.
3. Replace the system board.
1. Replace the fan.
2. Apply thermal grease.
3. Replace the system board.
Replace the system board.
Press F1 to enter ThinkPad Setup after the error message
is displayed. Then clean up the storage.
Replace the battery.
Replace the battery.
or scan the following QR Code.
.
Chapter 4 Related service information
35