Operation; Front Control Panel - ViewSonic Optiquest Q53 User Manual

OPERATION

To adjust the monitor, follow the numbered steps in sequence shown below.
Steps to make adjustments
Press the Power On/Off* button to turn the monitor on.
Power light:
Green = on
Orange = power saving mode
Turn the dial under the Brightness or
Contrast icon as shown below. There
is no light for Contrast or Brightness.
For more information, see page 9.
Press the SELECT button repeatedly
to select the control you want to
adjust.
Press the [–] or the [+] button to make
adjustments.
To make other adjustments, repeat steps
2-4. Adjustments are saved
automatically.
* The monitor automatically degausses when you turn on the monitor. Degaussing
removes magnetic field buildup that can affect color purity and convergence.
However, turning the monitor on and off repeatedly may cause damage. After
turning the monitor off, wait 15 minutes before turning it on again.
Optiquest Q53
OPTIQUEST
SELECT
7