Quick Installation - ViewSonic MB110 User Manual

Quick Installation

1 Write the serial number on the back of the monitor in the space
provided on page 1 labeled "For your records" and register your
monitor's warranty on the Internet at: http//:www.viewsonic.com.
2 Read the Precautions section thoroughly (page 5) before installing the
monitor. Make sure the computer and the monitor are both turned off
before connecting any cables.
3a PC users: Attach the video cable to the Video Input port on the monitor
(see below), then connect the other end to your computer.
E
N
3b Macintosh
G
Macintosh adapter (part No. VMA-1). To order an adapter, contact
L
ViewSonic Customer Support (see back cover of this guide).
I
S
4 Plug the monitor's DC OUT and Base OUT connectors (on the cable
H
attached to the back of the monitor) into the DC IN and BASE IN ports
located on the monitor base.
5 Audio Installation
1) Plug the audio cable into the monitor's AUDIO IN port, then into the
LINE OUT port of your computer's sound card.
AUDIO IN
(connect to
LINE OUT of
your computer's
sound card )
AC Power
socket
Getting Started
6
®
users: A Macintosh computer requires a ViewSonic
MIC OUT
(Microphone)
SUPER BASS
OUT
(Auxillary audio)
USB OUT USB IN
(4 Downstream (1 Upstream
ports) port -- from
computer)
On Side of Monitor Base
DC OUT
D-sub 15 pin
(Sub-Woofer
VIDEO IN
power) &
BASE OUT
(Sub-Woofer
communication)
BASE IN DC IN
(Sub-Woofer (Sub-Woofer
communication) power)
Headphones
External
Microphone
On Side of Monitor
®
....continued
BNC
VIDEO IN
Monitor
Base
ViewSonic MB110