Advertisement
BL-PUTN Ultra-Thin Puck Light Owner's Manual
Battery Installation
1. To open, when looking at the back, twist back cover counter-clockwise
and remove.
2. Insert 3 AAA batteries (follow the illustration inside the battery compartment).
Ensure the batteries are inserted so that the flat ends are making contact
with the springs.
3. To close, replace the cover and turn clockwise.
Operation
Tap the lens once for on, tap again to dim, and a third tap
will turn off the light.
Light Installation
Determine mounting location and type of mount
Advertisement
Table of Contents
Related Manuals for WESTEK BL-PUTN
Summary of Contents for WESTEK BL-PUTN
- Page 1 BL-PUTN Ultra-Thin Puck Light Owner’s Manual Battery Installation 1. To open, when looking at the back, twist back cover counter-clockwise and remove. 2. Insert 3 AAA batteries (follow the illustration inside the battery compartment). Ensure the batteries are inserted so that the flat ends are making contact with the springs.
- Page 2 CAUTION: Be cautious of what surface the adhesive is attached, as it may remove paint or damage surface. Mounting with double-sided 3M adhesive tape 1. Peel and remove one side of the tape backer to expose adhesive and firmly attach centered in the back of puck. 2.
Need help?
Do you have a question about the BL-PUTN and is the answer not in the manual?
Questions and answers