Advertisement
Terminal Board on Rear Cover
Signal Level and Terminal Impedance
Hi
VTR
Note: The video input/output terminals are equipped with "Automatic Termination Switch". If only input signal
is applied, they are terminated by 75ohm, and if both ea
signals applied, they are opened to
high impedance.
VIDEO
AUDIO
C) n
AUTO 750/HIGH
OUT
Video signal
includes
sync signal.
1Vrms=0dB
at 400Hz
Video and
audio signal
AUDIO/VIDEO
AUDIO
VIDEO
LINE IN Terminals
Receive video and audio signals from outside source.
This signal is available at the LINE OUT (Throughout)
terminals.
LINE OUT Terminals
LINE IN signals are available at this terminal
—
(Throughout).
VTR (8-Pin) Terminal
Receives video and audio signals from VTR, VCR or
Video Disc which has 8-Pin Connector.
There may be a possibility of a brightness reduction or interference if more than 10 units are
connected.
Please
carefully confirm
that these
problems
do not exist with the units before
connection.
|
Advertisement
