Keychron V3 MAX User Manual page 5

1
Switch To The Right System
Please make sure the system toggle on
the top left corner has been switched
to the same system as your computer's
operating system.
2
Connect 2.4GHz Receiver
Connect the 2.4GHz receiver to
the device USB port.
Switch toggle to 2.4GHz mode
2.4G / Cable / BT
2.4G = 2.4GHz
Receiver
Note: For the best wireless experience, we recommend using the
extension adapter for receiver and putting the 2.4GHz receiver
somewhere on your desk close to your keyboard for a low rate
of latency and fewer signal interferences.
Type-C
Extension Adapter
Cable
For Receiver
2.4GHz
5