Advertisement
Using the Master Prep
c
Shaft
a
Fig. 1
CAUTION: Blades are sharp! Use extreme
caution when handling the blades.
Always hold them by the shaft.
IMPORTANT: Never run the appliance
empty.
1
Place the Master Prep
Pitcher on a clean, dry, level surface.
2 Holding the blade by the shaft, place it
onto the spindle pin inside the pitcher.
(Fig. 1, a)
IMPORTANT: Place blade inside the
container carefully as blades are sharp.
WARNING: DO NOT try to place the
blade onto the power head and then into
the pitcher. (Fig. 1, b)
QB800W_30_IB_ENG_120629_1.indd 7
Advantage Pitcher
®
b
Advantage
®
Fig. 2
3 Add the ingredients to be processed into
the pitcher.
IMPORTANT: Never add ingredients into
the pitcher before placing the blades in
first.
4 Place the pitcher splash guard onto the
top of the pitcher. (Fig. 1, c)
5 Place the power head on top of the
pitcher splash guard making sure that it
is securely in place. (Fig. 2)
WARNING: DO NOT attempt to operate
the appliance without the safety splash
guard in place.
www.ninjakitchen.com
7
12-06-29 3:12 PM
Advertisement
