7) Paper rolled in the fuser
Description : If contaminated at intervals of 77.6mm on the back of a paper.
1. Contamination of the
pressure roller or heat roller
2. Check the claw of the fuser
whether it is deformed.
Service Manual
Alignment & Troubleshooting
After disassembling the fuser,
clean contamination between the
heat roller and the thermostor and
f set).
remove the contamination of the
pressure roller.
1. If there is heavy background,
2. Clean the surface of the heat
3. Check the warp or separation
4-51
repair it by the background
troubleshooting method.
roller with IPA or water
of the print claw and the holder
plate claw, and then manage it.
Samsung Electronics