Yamaha FJR13ESM 2020 Owner's Manual page 30

Instrument and control functions
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 7-39.)
GEAR
4
C.TEMP
4
TIP
The selected information display can-
not be switched while the message
"Hi" is flashing.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption display:
FUEL AVG
The average fuel consumption display
modes "km/L", "L/100km" or "MPG"
show the average fuel consumption
since the display was last reset.
 The "km/L" display shows the av-
erage distance that can be trav-
eled on 1.0 L of fuel.
 The "L/100km" display shows the
average amount of fuel necessary
to travel 100 km.
 The "MPG" display shows the av-
erage distance that can be trav-
eled on 1.0 US gal of fuel.
˚F
Hi
ECA10022
MPG
28.9
4-13
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the "RESET" button briefly so
that the average fuel consumption dis-
play flashes, and then push the "RE-
SET" button again for 2 seconds while
the display is flashing.
TIP
After resetting the average fuel con-
sumption display, "_ _._" will be shown
for that display until the vehicle has
traveled 1 km (0.6 mi).
NOTICE
If there is a malfunction, "– –.–" will
be continuously displayed. Have a
Yamaha dealer check the vehicle.
Instantaneous fuel consumption dis-
play:
CRNT FUEL
The instantaneous fuel consumption
display modes "km/L", "L/100km" or
"MPG" show the fuel consumption un-
der the current riding conditions.
 The "km/L" display shows the dis-
tance that can be traveled on 1.0 L
of fuel.
 The "L/100km" display shows the
amount of fuel necessary to travel
100 km.
 The "MPG" display shows the dis-
tance that can be traveled on 1.0
US gal of fuel.
ECA15474
MPG
32.3