1. Manuals
  2. Brands
  3. REI Manuals
  4. Matrix Switcher
  5. UHD816-EX230-K
  6. User manual

REI UHD816-EX230-K User Manual

18gbps 8 x 8 hdmi matrix (70m) with ir matrix function
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UHD816-EX230-K
18Gbps 8 x 8 HDMI Matrix (70m)
Follow us on Youtube and
Facebook
with IR Matrix Function
U S E R M A N U A L
www.orei.com
page 1

Advertisement

Table of Contents
loading

Related Manuals for REI UHD816-EX230-K

Summary of Contents for REI UHD816-EX230-K

  • Page 1 UHD816-EX230-K 18Gbps 8 x 8 HDMI Matrix (70m) Follow us on Youtube and Facebook with IR Matrix Function U S E R M A N U A L www.orei.com page 1...

  • Page 2: Table Of Contents

    Table of Contents Introduction Features Package Contents Specifications Operation Controls and Functions IR Remote IR Cable Pin Assignment IR Control System EDID Management Web GUI User Guide RS-232 Control Command Application Example Thank you for purchasing this product Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product.
  • Page 3 Registration Page Please Activate your warranty by registering our product through the link below - https://www.orei.com/pages/warranty-registration Technical Support Need Help? Our experienced Technical Support Team is here for you to answer your questions, give technical advice or help troubleshoot your project to get you installed on time and on budget.

  • Page 4: Introduction

    Introduction The UHD816-EX230-K Matrix can connect up to 8 HDMI sources and output to 16 displays. It features eight HDMI outputs, and each HDMI output is mirrored to pro- vide a CAT-Cable output which runs simultaneously. It supports transmission of video with resolutions up to 4K@60Hz 4:4:4 and supports HD digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio.

  • Page 5: Package Contents

    Package Contents UHD816-EX230-K Matrix 1pcs CAT Receiver 8pcs IR Remote 1pcs 12V/5A Power Supply 1pcs RS-232 Serial Cable (1.5m, DP9 female head to 3 pin Phoenx connector) 1pcs IR Blaster Cable (1.5m) 8pcs IR Receiver Cable (1.5m) 9pcs Machine Screw (KM3*6)
  • Page 6 Specifications Connection Inputs: 8 × HDMI Type A [19-pin female] Outputs: 8 × HDMI Type A [19-pin female] 8 × CAT port [RJ45] Matrix Controls: 1 × TCP/IP [RJ45] 1 × RS-232 [3-pin phoenix connector] 8 × IR OUT [3.5mm Stereo Mini-jack] 1 ×...

  • Page 7: Operation Controls And Functions

    Operation Controls and Functions Front Panel INPUT OUTPUT POWER 18Gbps HDMI 8x8 Matrix over CAT 70m INPUT OUTPUT Name Function Description The LED will light up green when the product is working normally, and Power LED red when the product is on standby. IR window IR receiver window.
  • Page 8 Operation Controls and Functions Rear Panel IR OUT IR EXT TCP/IP RS-232 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 HDMI HDMI HDMI HDMI HDMI HDMI HDMI HDMI HDMI IN OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8 DC 12V...
  • Page 9 Operation Controls and Functions CAT Receiver Panel CAT IN SERVICE IR IN DC 12V HDMI OUT Name Function Description HDMI signal output port, connect to a HDMI display device such as TV HDMI OUT or Projector with an HDMI cable. CAT IN Connect to the CAT OUTPUT port on the Matrix with a CAT cable.

  • Page 10: Ir Remote

    IR Remote Power on or Standby: Power on the Matrix or set it to standby mode. Input 1/2/3/4/5/6/7/8: Input Press these buttons to select the input signal source. ◀ ▶: Select the last or next signal input channel. Output Output 1/2/3/4/5/6/7/8: Press these buttons to select the signal output channel.

  • Page 11: Ir Cable Pin Assignment

    IR Remote The second way: If the IR receiver window of the Matrix is blocked or the Matrix is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR remote signal. The furthest distance of using the IR remote is 7 meters and the IR remote is directly faced to the IR receiver head.

  • Page 12: Ir Control System

    IR Control System The product supports one-way IR matrix function. When Matrix is connected to CAT Receiver through CAT6 cable, you can control the input source device (local end) by the IR control signal from the CAT receiver (remote end). For example, the HDMI output signal on the CAT Receiver 4 is from the HDMI IN 4 port, so IR input signal of the CAT Receiver 4 will be emit to IR OUT 4 port of the Matrix.

  • Page 13: Edid Management

    EDID Management This Matrix has 21 factory defined EDID settings, 2 user-defined EDID modes and 16 copy EDID modes. You can select defined EDID mode or copy EDID mode to input port through RS-232 control or Web GUI. RS-232 control operation: Connect the Matrix to PC with a serial cable, then open a Serial Command tool on PC to send ASCII command “s edid in x from z!”...
  • Page 14 EDID Management The defined EDID setting list of the product is shown as below: EDID Mode EDID Description EDID Mode EDID Description 1080p, Stereo Audio 2.0 4K2K60, HD Audio 7.1HDR 1080p, Dolby/DTS 5.1 USER1 1080p, HD Audio 7.1 USER2 1080i, Stereo Audio 2.0 copy from hdmi output 1 1080i, Dolby/DTS 5.1 copy from hdmi output 2...

  • Page 15: Web Gui User Guide

    Web GUI User Guide The Matrix can be controlled by Web GUI. The operation method is shown as below: Step 1: Get the current IP Address. The default IP address is 192.168.0.100. You can get the current Matrix IP address via RS-232 control.
  • Page 16 Web GUI User Guide Select the Username from the drop-down list and enter the password. The default passwords are: Username User Admin Password user admin After entering the password, click the “LOGIN” button and the following Status page will appear. ■...
  • Page 17 Web GUI User Guide ■ Video Page ① Output: The current device’s OUTPUT port. You can select signal source for it. You can do the following operations on the Video page: ② Input: You can click the drop-down menu to select signal source for the correspond- ③...
  • Page 18 Web GUI User Guide ① Inputs: Input channel of the device. You can do the following operations on the Input page: ② Active: It indicates whether the channel is connected to a signal source. ③ Name: The input channel’s name. You can modify it by entering the corresponding ④...
  • Page 19 Web GUI User Guide ■ Output Page You can do the following operations on the Output page: ① Outputs: Output channel of the device. ② Name: The current output channel’s name. You can modify it by entering the corresponding name (max length: 12 characters) in the input box (Chinese name is unsupported).
  • Page 20 Web GUI User Guide You can perform CEC management on this page: ① Input Control: You can control the operation of each input source by pressing the icons on the page. (You can control multiple inputs simultaneously.) ② Output Control: You can control the operation of each display, such as power on/ off, volume +/-, active source switching.
  • Page 21 Web GUI User Guide After searching is completed, it will switch to the login page, the default network setting is completed. Modify Username Click the “User” button, enter the correct Old Password, New Password, and Confirm Password, and then click “Save”. After successful modification, there will be a prompt, as shown in the following figure: Note: Input rules for changing passwords: (1) The password can’t be empty.
  • Page 22 Web GUI User Guide Modify Network Setting Modify the Mode/IP Address/Gateway/Subnet Mask/Telnet Port as required, and click “Save” to save the settings. Then it will come into effect. After modification, if the Mode is “Static”, it will switch to the corresponding IP Address; if the Mode is “DHCP”, it will automatically search and switch to the IP Address assigned by the router.

  • Page 23: Rs-232 Control Command

    RS-232 Control Command The product also supports RS-232 control. You need a serial cable with RS-232 male head and DB9 transfer USB male head. The RS-232 head of the serial cable is con- nected to the RS-232 control port with DB 9 at the rear of the Matrix, and the USB head of the serial cable is connected to a PC.
  • Page 24 RS-232 Control Command Command Function Description Example Feedback Default Code System Setting help! List all commands help! r type! Get device model r type! HDP-MXB88D70M Get the unit all status: power, beep, lock, in/ out connection, video/ r status! Get device current status r status! audio crosspoint, edid, scaler,hdcp,...
  • Page 25 RS-232 Control Command Command Function Description Example Feedback Default Code Get the serial port baud rate of r baud rate! r baud rate! Baudrate:115200 RS02 module Set the control ID of the product, s id z! s id 888! id 888 z=000~999 Output Setting s in x av...
  • Page 26 RS-232 Control Command Command Function Description Example Feedback Default Code EDID Setting Set input x EDID from default EDID z, x=0~8(0=all),z=1~39 1. 1080p,Stereo Audio 2.0 2. 1080p,Dolby/DTS 5.1 3. 1080p,HD Audio 7.1 4. 1080i,Stereo Audio 2.0 5. 1080i,Dolby/DTS 5.1 6. 1080i,HD Audio 7.1 7.
  • Page 27 RS-232 Control Command Command Function Description Example Feedback Default Code EDID Setting input 1 EDID: 4K2K60_ 444,Stereo Audio 2.0 input 2 EDID: 4K2K60_ 444,Stereo Audio 2.0 input 3 EDID: 4K2K60_ 444,Stereo Audio 2.0 input 4 EDID: 4K2K60_ Get EDID status of the 444,Stereo Audio 2.0 r edid in x! input x,...
  • Page 28 RS-232 Control Command Command Function Description Example Feedback Default Code ECE Setting set input x menu left oper- s cec in x input 1 menu left ation by CEC, s cec in 1 left! left! operation x=0~8(0=all input) set input x menu right s cec in x input 1 menu operation by CEC,...
  • Page 29 RS-232 Control Command Command Function Description Example Feedback Default Code CEC Setting s cec hdmi set output y volume down by s cec hdmi hdmi output 1 vol- out y vol-! CEC, y=0~8(0=all output) out 1 vol-! ume down set output y volume up by s cec hdmi s cec hdmi hdmi output 1 vol-...
  • Page 30 RS-232 Control Command Command Function Description Example Feedback Default Code Network Setting Set subnet Mask address:255.255.255.0 (Please use “s net s subnet reboot!” command or s subnet xxx.xxx.xxx. Set network subnet mask repower device to 255.255.255.0! xxx! apply new config!) DHCP on, Device can’t config subnet mask, set DHCP off first.

  • Page 31: Application Example

    Application Example IR Blaster IR EXT IR OUT TCP/IP RS-232 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 HDMI HDMI HDMI HDMI HDMI HDMI HDMI HDMI HDMI IN OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8 DC 12V Matrix...
  • Page 32 18Gbps 8 x 8 HDMI Matrix (70m) with IR Matrix Function UHD816-EX230-K www.orei.com © 2023 page 32...

Table of Contents