Table of Contents
Advertisement
Viewing
the recording
on TV
If your TV or VCR is a monaural
type
- CCD-TRV87
only
Connect
the yellow
plug
for video
and the whLte plug for audio
on both your
camcorder
and the TV or the VCR (you do not connect
the red plug)
With thts connection,
the sound
is monaural
To connect
to a TV or VCR without
VideolAudio
input
jacks
Use an NTSC system
RFU adaptor
(not supplied)
Refer to the operating
instructions
of your TV or VCR and tl_e RFU adaptor.
W_th an
RFU adaptor,
the sound
is monaural
even on stereo
models.
If your "IV or VCR has an S video jack (CCD-TRV67/TRV87
only)
Connect
using an S video cable (not supplied)
to obtain
high-quahty
pictures
With this
col_ection,
you do not need to connect
the yellow
{video) plug of the A/V
connecting
cable.
Connect
the S video
cable (not supplied)
to the S video jacks on both your
camcorder
and the TV or the VCR
Monitoring
the picture from a TV or VCR (CCD-TRV87 only)
You can monitor
the picture
on the LCD screen.
Connect
your camcorder
to the outputs
on the TV or VCR
Using the AV cordless
IR receiver
- CCD-TRV87
only
Once you connect
the AV cordless
IR receiver
(not supphed)
to your
TV or VCR, you
can easily view
the picture
on your TV For details,
refer to the operating
instructions
of
the AV cordless
IR receiver.
S.LASER LINK
SUPER LASER LINK
emitter
(1) After
connecting
your
TV and AV cordless
IR receiver,
set the POWER
switch
on the AV cordless
IR receiver
to ON.
(2) Turn
the TV on and set the TV/VCR
selector
on the TV to VCR.
(3) Press
S LASER
LINK.
The lamp
of S.LASER
LINK
lights
up.
(4) Press
ID_ on your
camcorder
to start
playback.
(5) Point
the SUPER
LASER
LINK
emitter
at the AV cordless
IR receiver.
Adjust
the position
of your
camcorder
and the AV cordless
[R receiver
to obtain
clear
playback
pictures.
28
Advertisement
Table of Contents
