Instruction manual ProDevice MMD360+ CONTENTS 1. Features 2. Packaging removal 3. Overview 4. Operation 5. Instruction video 6. Destruction of storage media 7. Safety precautions 8. Maintenance www.pro-device.com...
Page 3
Instruction manual ProDevice MMD360+ Thank you for purchasing the ProDevice MMD360+ destroyer. This device is designed for physical destruction of 2,5” and 3,5” hard disks, SSD disks, tablets and cell phones. This user manual is integral to the destroyer. Read and understand the manual before operating the device.
Instruction manual ProDevice MMD360+ 1. FEATURES • ProDevice MMD360+ destroyer with mounted flash module. • Handle. HDD module. • • Two pins for hard drives. • Seven pins for flash media. Bumper for HD module. • • Two hex keys.
Instruction manual ProDevice MMD360+ 3. OVERVIEW Handle Bumper HDD Module ProDevice MMD360+ for destruction of HDD Handle Upper part of the flash module Lower part of the flash module ProDevice MMD360+ for destruction of flash media www.pro-device.com...
Page 6
Instruction manual ProDevice MMD360+ Technical specification Parameter Value Ambient temperature Ambient humidity 560 mm x 340 mm x 430 mm Dimensions (22.0 in x 13.4 in x 16.9 in) 560 mm x 340 mm x 750 mm Dimensions (with a handle) (22.0 in x 13.4 in x 29.5 in)
Instruction manual ProDevice MMD360+ 4. OPERATION 1. Place the destroyer on a stable surface. 2. Secure the device to the ground with the screws through the holes in the legs of the destroyer. 3. Insert the handle into the hole in the drive shaft and screw it on.
Instruction manual ProDevice MMD360+ 5. INSTRUCTION VIDEO Scan the QR code to watch an official video presenting correct usage of the ProDevice MMD360+ destroyer. The video is an inseparable part of this manual Instruction. www.pro-device.com...
Instruction manual ProDevice MMD360+ 6. DESTRUCTION OF STORAGE MEDIA Do not try to destroy the hard disk area marked below (red). This part of the disk is made of solid steel. Each disk has a bit different structure, but you can usually destroy the remaining area of the disk.
Instruction manual ProDevice MMD360+ 7. SAFETY PRECAUTIONS Please read the operating manual before initial start-up, operation and maintenance of the device and keep it for later use or for passing on to any subsequent users. Service may be performed by authorized personnel only.
Instruction manual ProDevice MMD360+ 8. MAINTENANCE Mechanical maintenance may only be performed by the manufacturer's authorized service. The device requires an inspection by an authorized service of the manufacturer at least every 10,000 work cycles. In the event of a failure or interruption in operation due to damage to the device or any of its components, contact the authorized service of the manufacturer.
Page 12
INTERNATIONAL HOTLINE: +48 122 919 101 CONTACT ProDevice Spółka z ograniczoną odpowiedzialnością ul. Kościuszki 1, 32-020 Wieliczka, Poland tel. +48 122 919 101 e-mail: info@pro-device.com service: support@pro-device.com If you have an improvement idea or suggestion, write to info@pro-device.com info@pro-device.com www.pro-device.com MANUFACTURER'S ADDRESS DETAILS DISKUS Polska Spółka z ograniczoną...
Need help?
Do you have a question about the MMD360+ and is the answer not in the manual?
Questions and answers