The product is not in- tended for prolonged sitting or transfer. Specification: • Maximum user weight Denver / Atlanta: 175 kg Chicago / Dallas: 200 kg • Height-adjustable footrests • Wheelchair, 2 swivel castors, lockable •...
• Dimensions: The product complies with Regula- Denver / Atlanta: 780 mm x 640 mm x 780 mm tion (EU) 2017/745 (MDR) Chicago / Dallas: 780 mm x 640 mm x 780 mm Caution! Observe the safety instructions 2.6 Disposal...
The prerequisites are the general • Only move the product at a moderate pace. terms and conditions (www.rebotec.de/agbs), as • Never lean out of the chair. If the swivel castors are well as the intended use. The statutory warranty in an unfavourable position (pointing inwards), the provisions shall apply.
BA-Nr.: 02.07.080/2023-09-A01 REBOTEC / 9.2 Adjusting the footrest height 7 Reuse, lifetime • The footrest height can be adjusted in 7 positions. • The product is suitable for reuse. How often the Loosen and remove the screws on the side of the product can be reused depends on the frequency footrest using an Allen key (SW 5).
BA-Nr.: 02.07.080/2023-09-A01 REBOTEC / If necessary, depending on the patient’s lim- • The patient should itations, sitting down and getting up must be move forward on the chair done with the help of a caregiver. Subse- surface until their feet are on quent adjustments may only be made by qualified the floor.
BA-Nr.: 02.07.080/2023-09-A01 REBOTEC / • Now the two halves can be swung forward. Check the locking mechanism at regular in- tervals, as possible limescale deposits on the locking mechanism can impair its func- • Release the brakes and push the chair over the toi- tion and smooth operation.
BA-Nr.: 02.07.080/2023-09-A01 REBOTEC / Only the bucket can be cleaned and disinfected Polyamide: Frame, armrests, footrests by machine. Polyurethane: Seat, backrest, leg rest, head sup- • Do not use hard objects such as scrapers, wire port brushes, or metal sponges.
Page 10
• Do not make any unauthorised changes to the product. This may affect the safety and function of the product. • In such cases, REBOTEC will not assume any lia- bility. • Only use the manufacturer’s spare parts for repairs.
Adjustment clip 30 mm for stabiliser strut 440.10.32 PUR armrest pad 322.30.20 Safety belt size M/L 322.10.50 Safety belt slide-on pad XX= Colour variant Use only REBOTEC spare parts and accessories to ensure the proper and safe functioning of the product - 11 -...
BA-Nr.: 02.07.080/2023-09-A01 REBOTEC / 16 Drawing & dimensions Denver Atlanta Chicago Dallas Designation Dimensions Dimensions Dimensions Dimensions in mm in mm in mm in mm 1030 1025 Overall height 1029 1030 Overall width Overall depth Seat height Width between armrests...
Need help?
Do you have a question about the Denver and is the answer not in the manual?
Questions and answers