Page 1
BA No.: 02.07.148/2017-10 rebotec.com.au info@rebotec.com.au User Instructions Shower-Commode Patient-Propelled Roll Chair Shower-Commode Patient- Propelled Roll Chair “Venedig” Art. No.: 380.xx.yy/ 100 kg (220 lbs) Serial No. Photo shows similar model Xx = colour variant yy = equipment variant Important advisory! Read this User Instructions booklet before first time use and keep it at hand for the user.
REBOTEC / BA No.: 02.07.148/2017-10 1.3. Symbols 1. General advisory Read User Product 1.1. Product description instruc- year of tions! Manuf. Product complies with the Medical Products Directive 93/42/EWG Caution! Follow safety advisories Attention! Important Advisory info Care in- Mainte-...
REBOTEC / BA No.: 02.07.148/2017-10 The commode roll chair may be used where the Conformity symbol use of or the access to a conventional toilet is no Serial number - product longer possible due to a limitations. The seat sur-...
REBOTEC / BA No.: 02.07.148/2017-10 The chair may be pushed only at a walking speed 4. Re-use, lifetime or less (with or without the patient). The product is designed for re-use. The number Do not lean out of the chair (when the chair is still of re-use occasions depends on the product’s fre-...
REBOTEC / BA No.: 02.07.148/2017-10 Caution – danger of injury -temperature! Dimensions Venedig 320 - 460 mm At surface temperatures over 40°C (104°F), Foot height (12.60”-18.11”) there’s a risk of injury. Therefore do not expose 775 mm (30.51”) Armrest height the chair to any sources of heat (exposure to the 125 mm (5”)
REBOTEC / BA No.: 02.07.148/2017-10 8. Setting-up for use The product is delivered partially pre-assembled. The following assembly instructions must be car- ried out before first-time use: 1. Install backrest (also see 9.3) Place the frame on an even surface and swivel out both armrests (1) all the way back until the 3.
REBOTEC / BA No.: 02.07.148/2017-10 The patient should then move his body forward 9. Using the chair until his/her feet are flat on the floor. When using the chair, the following points must The patient must then...
REBOTEC / BA No.: 02.07.148/2017-10 9.4. Adjusting the foot plate height The foot plates are height-adjustable 10-24 mm (0.39-0.94”). To do this, unscrew the screws of the foot plate on the side using an SW5 Allen key. Select the appropriate height and tighten the screws of the foot plate.
REBOTEC / BA No.: 02.07.148/2017-10 9.12. Tipping prevention 11. Care To overcome obstacles, the patient-propelled In general the chair can be chair can be leaned backwards. This raises the cleaned using a mild conventional front wheels and thus the obstacle can be over- cleaning and disinfecting agent.
Page 11
REBOTEC overtakes no liability. When making repairs, use only original spare parts from REBOTEC. Observe all advisories concerning guarantee and warranty. Once a complete maintenance or repair of the chair is done, we recommend a complete clean- ing for assuring hygiene.
Page 12
REBOTEC / BA No.: 02.07.148/2017-10 - 12 -...
Need help?
Do you have a question about the Venedig and is the answer not in the manual?
Questions and answers