Table of Contents
Advertisement
Tracking-force weight
Tracking-force bar.
Arm clamp.
Headshell
Locking collar
mechanism as follows:
1. Plug the power cord into an AC outlet.
2. Set the size selector to MANUAL.
3. Push the START button.
LEVEL BALANCE ADJUSTMENT
1. Slide the tracking-force weight down to the base
of the tracking-force bar (Fig. 6).
NOTE:
If the weight does not slide along smoothly, loosen the
screw on the outside with the accessory screwdriver so
that it can be shifted smoothly.
Index line
Turn anti-skating
knob to '0' and
align with the
index line
Tracking-force weight
Arm elevator
7. Attach the stylus cover to protect the stylus.
NOTE:
If the level balance of the tonearm is not properly at-
tained, the stylus will be lowered onto the record at an
angle, This will cause distortion when you play a record
and it may damage the record and stylus, Make sure that
you have attained the level balance properly by referring
to Fig. 7.
>
=
|
e
Headshell end is too heavy. — Move the counterweight in
the direction of the arrow.
:
Fig. 7
The tracking-force scale ring on the tracking-force
bar has 0.5g steps. Slide the tracking-force weight
along the bar and when the end of the weight is
aligned with one of the lines indicated in Fig. 8,
then a tracking force
equivalent
to the value
indicated will be applied to the cartridge.
Advertisement
Table of Contents
