Page 6
BP Serires TP400/TP600 Programming Highlights DUAL TEMPERATURE RANGES FILTRATION This system incorporates two temperature range settings with The system is factory-programmed with one filter cycle that will independent set temperatures. The High Range is indicated in the run in the evening (assuming the time-of-day is properly set) display and might be set between 80°F and 104°F.
CONTROL PANEL MANUAL BP Series TP400/TP600 Quick Reference Card START UP When the GFCI for the spa is switched on to supply power, a startup sequence of numbers will appear on the display. If no READY AND REST MODES button is pressed, LINK will appear after the startup sequence.
BASIC OPERATION PROGRAMMING The Up and Down buttons are often Refer to the TP400/TP600 User Guide (40940) for detailed operation, referred to as Temperature Buttons. Some panels only have a programming and message instructions. single Temperature Button. Navigating the deeper menu structure is done with only 2 or 3 Press a Temperature Button once and the current Set buttons on the control panel.
Page 12
Manual de programación serie BP TP400/TP600 RANGOS DE TEMPERATURA FILTRACIÓN Este sistema incorpora dos configuraciones de rango de El sistema está programado de fábrica con un ciclo de filtrado temperatura establecidas de forma independiente. que se ejecutará por la noche (suponiendo que la hora del día El rango alto se indica en la pantalla y puede configurarse esté...
MANUAL DEL PANEL DE CONTROL BP Series TP400/TP600 Acceso rápido PUESTA EN MARCHA Cuando el panel de mando del spa se enciende, aparecerá una MODOS LISTO Y DESCANSO secuencia de números de inicio en la pantalla. si no se presiona Si la bomba de filtración es una bomba de 2 velocidades, el modo...
OPERACIÓN BÁSICA PROGRAMACIÓN Los botones Arriba y Abajo a menudo se conocen como Consulte la Guía del usuario de TP400/TP600 (40940) para conocer botones de temperatura. Algunos paneles solo tienen un único el funcionamiento detallado. Instrucciones de programación y botón de temperatura. mensajes.
Need help?
Do you have a question about the BP Series and is the answer not in the manual?
Questions and answers