Aiwa NSX-S222 Operating Instructions Manual page 11

The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
71 Press TUNER BAND to select a band, and press
<< DOWN or >> UP to select a station.
2 Press Ill SET to store the station.
A preset number beginning. from 1 in consecutive order for
each band is assigned to the station.
Preset number
ROCK| POP CLASSIC '
'
ees cee eee
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
NOTE
"FULL" is displayed if you attempt to store more than 32 preset
stations.
cd EPIL TIO LILA OEE
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
7 Press BAND while pressing SHIFT to select a
band.
2 Press numbered buttons 0-9 and +10 to select a
preset number.
Example: :
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER BAND to select a band: Then, press PRESET
repeatedly or turn MULTI JOG.
Each time B PRESET is pressed, the next ascending number
is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
@ CLEAR, and press II SET within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
To change the MW tuning interval
The default setting of the MW tuning interval is 9 kKHz/step. If
you use this unit in an area where the frequency allocation system
is 10 kHz/step, change the tuning interval.
Press POWER while pressing >.
To reset the interval, repeat this procedure.
When the MW tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
ENGLISH 11
RADIO RECEPTI