Advertisement
@ Transferring backup data.
All the contents of the Organizer are transferred. During backup data
transfer, data stored on the receiver are deleted. Proceed with cau-
tion.
(Backup
data transfer
is only possible
between
identical
products.)
_
1. Select the data transfer function on the receiver and set it in the
receive mode for backup data transfer.
[and] 2
<UNIT TO UNIT>
BACKUP
RECEIVING
MODE
2. Select the data transfer function on the transmitter and Baro
backup data transfer.
[2nd] [OPTION] [2nd] 1
@ Verifying data
it is possible to verify data by mode or by entry. If any discrepancies
are found, the message "VERIFY ERROR" is displayed.
Verify data in the SCHEDULE mode.
1. Select the mode on the transmitter and the receiver.
SCHEDULE
(Transmitter)
SCHEDULE]
(Receiver)
2. Set the receiver in the verify mode.
:
a
3
<UNIT TO UNIT>
-VERIFYING-
3. Select the data transfer function on the transmitter.
OPTION
Note: To verify an entry, display the entry to be verified and
press
4. Perform verification.
1
(2) Transferring data with another ZQ series or IQ
series Organizer
@® Data transfer restrictions
There aré some
restrictions when transferring data with any ZQ
series Organizer other than the ZQ-4450 or the IQ series Organizers
(previously shown). These restrictions result from differences in func-
tions and the maximum allowable size of an entry between the Or-
ganizers.
@® When transferring SCHEDULE data from ZQ-6000
series, 1Q-8000, IQ-7000 or ZQ-5000 series Organizers
® Any alarms set on SCHEDULE data transferred from the ZQ-6000,
ZQ-8000, |Q-7000 or ZQ-5000 series. Organizers, regardiess of
their precise setting time for specific event, will be set to the
event's starting time on thé ZQ-4450.
ZQ-4450M
TEL mode:
537 characters
SCHEDULE mode:
523 characters
MEMO: mode:
544 characters
TO DO mode:
530 characters
lf an entry exceeding these limits is sent to the ZQ-4450, "/0.
DEVICE ERROR?" appears and the transfer will not be successful.
The maximum number of characters that can be edited after an
entry is transferred to the ZQ-4450 is 514 in the TEL mode and
512 in the SCHEDULE,
MEMO and TO DO modes. Entries ex-
ceeding these limits can be displayed but cannot be edited. Those
exceeding 515 characters can neither be displayed nor edited.
° No data verification can be carried out.
|
© Transferring data by mode or by entry
Advertisement
