Advertisement
4.9-6.4 GHz, 3-foot MIMO Dish Antenna
with C5X Mimosa Adapter, 2 Pack
KP-6DCN-3-C5X
Installation steps
Before use this equipment, please read this guide for installing equipment quickly.
Feedhorn
Reflector
（Qty.2pcs）
（Qty.6x2pcs）
U Bolt
Cross hex wrench
（Qty.4pcs）
（Qty.1pc）
Bracket Installation
1. Assemble the 6 pieces of Reflector on the
Bracket with hanger, and each Reflector is
fixed with 2 M6 screws.
4. Screw the device clockwise into the connector
and the holder, and then fix the device with 4
M4 hexagon socket screws.
Specifications by Band
Click the following link (or enter part number in "SEARCH" on website) to obtain additional part information including price, inventory and certifications:
4.9-6.4 GHz, 3-foot MIMO Dish Antenna with C5X Mimosa Adapter, 2 Pack KP-6DCN-3-C5X
3
Connector
Bracket with hanger
（Qty.2pcs）
（Qty.2pcs）
Screws (for bracket)
Hexagon socket screws
Locking the Feedhorn,
（M5 Qty.12x2pcs）
fixing the equipment
（M5 Qty.3x2pcs）
2. Use M5 screws to fix the Reflector, each
3. ① Remove connector
Reflector is fixed with 2 M5 screws.
② Install the feedhorn on the antenna and fix it
with 3 M5 screws.
5. Fix the U- groove to the Bracket with
6. Remove the nut on the U-Bolt , select the
nuts by M8 wrench.
appropriate position of the antenna to adjust
the antenna angle, lock the nut to the U-Bolt,
fix the antenna, and complete the
installation.
Note: The mounting assembly can accommodate
a Ø 30 - 80mm pole.
Antennas Engineered to Exceed
U-groove
（Qty.2pcs）
Screws
Assemble the reflector
Assemble the coupler
（M5 Qty.12x2pcs）
© 2020 Infinite Electronics, Inc. KP Performance Antennas is a registered trademark of Infinite Electronics, Inc.
+1 (855) 276-5772 | info@kpperformance.com |
kpperformance.com
Advertisement
