Related Manuals for AirLink Communications Version 2.40
Summary of Contents for AirLink Communications Version 2.40
- Page 1 Raven-E iDEN Quick Start Version 2.40 - September 2006 Copyright © 1993-2006 AirLink Communications, Inc. All rights reserved.
-
Page 2: Installing The Sim
For additional modem configuration options, please refer to the Raven-E iDEN Users Guide for TELUS. If the SIM card was pre-installed by AirLink, there is nothing more you Note: need to do. Skip to the Hardware section and/or to the DUN instructions, if you need Dial-Up Networking. - Page 3 Raven-E iDEN for TELUS - Quick Start, version 2.40 a. Using the tip of a PDA stylus, an unbent paperclip, or other slim blunt item press the yellow button of the SIM tray. On the Raven-E, the button is between two boards.
-
Page 4: Hardware Installation
TheRaven-E should now register on the network. Hardware Installation Your AirLink Raven-E should be mounted in a position that allows easy access for the cables so they are not bent or constricted. The LEDs on the front panel should be visible for ease of opera-... - Page 5 RSS-133 r1 (2 GHz Personal Communications) For more information visit http://www.industrycanada.ca. Your AirLink Raven-E will work with most Dual-Band PCS cellular antennas with a TNC con- nector that works in the high and low frequencies of iDEN . Connect the antenna or RF cable directly to the connector on the back of the Raven-E.
-
Page 6: Airlink Technical Support
Setup Wizard or other steps as applicable. September 2006 Refer to the User Guide for your modem or the AirLink website for AirLink prod- uct warranties. - Page 7 Raven-E iDEN for TELUS - Quick Start, version 2.40 • Utility Guides - These guides focus on the features of one of the AirLink modem utilities: Wireless Ace, AceView, AceNet, Modem Doctor, etc. • Application Notes and How-To Guides - These guides detail configuring the modem to work with a specific feature set or how the modem can be set up to work with a specific 3rd party (non-AirLink) device.
Need help?
Do you have a question about the Version 2.40 and is the answer not in the manual?
Questions and answers