Led Status - Deltaco SH-IPC09 User Manual

ENG
Thank you for choosing Deltaco!
1. Speaker
2. Passive infrared sensor
3. Camera lens
4. LED
5. Reset button
6. Light sensor
7. USB-C charge port
8. LED (charge status)
9. Microphone
10. MicroSD slot
The camera has a built-in
battery. Use the USB-C cable
to charge.
To power on/off, press and hold the
button for 3 seconds to turn the camera
on or off.
Mounting
This product has 2 different brackets
for mounting. Choose a bracket for your
needs.
Bracket (B) is commonly used outdoors.
Bracket (A) is popular because it is using
a magnet.
Drill holes in the wall or ceiling for the
bracket.
Mounting (A)
Mounting (B)
B. Adjust the camera angle by aiming
and rotating it. Fasten the screw.
Reset
Press and hold about 5 seconds for
reset. Any changed settings will change
to factory default.

LED status

Camera LED
Red = the camera is just turning on or
there is something malfunctioning.
Flashing red = waiting for WiFi con-
nection.
Flashing red fast = connecting to WiFi.
Blue = connected.
Charge LED
Red = charging.
Blue = Fully charged.
ONVIF
For use of ONVIF, please check the
product's page on Deltaco's website.
Install and use
1. Download and install the app "Deltaco
smart home" from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app "Deltaco smart
home".
3. Create a new account or log in to your
existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm
in the app.
8. Confirm the Wi-Fi network and
password.
9. Enter the device name.
The device name will be used by Ama-
zon Alexa and Google Home.
If you want to add the product to Google
home or Amazon Alexa, then download
the 3rd party app, "smart life" by Tuya.
7