Get to know your camera Antenna Spotlight Lens Microphone Photosensor...
Page 4
LAN Port Power Port Reset Button Speaker Reset Button Micro SD Card Slot (The screws need to be removed to open the cover.) Please cut the power off when inserting/removing your SD card to ensure it can be recognized.
Page 5
1. Power up your camera For the normal operation of the camera, please use the provided power cord to charge it. Power Port LAN Port Please use 2.4GHz Wi-Fi network instead of an Ethernet cable for the first time setting up the camera.
Page 6
The camera has a power port and a LAN port. Waterproofing must be done on both of these ports. 1. Wrap the power port with waterproofing tape (self-provided) as shown below. 2. Wrap the LAN port with the waterproofing tape (self-provided) or the waterproofing case.
Page 7
2. Download blurams App Download the App by searching "blurams" in the App Store or Google Play. Alternatively, you can open a QR scanner App and scan the blurams App QR code below to install the App. blurams App QR code...
Page 8
3. Add your camera to App Enter the blurams App, sign up for a free blurams account and log in. Go to the home page, click the "+" icon on the top right corner and select the model of your camera. Then follow the instructions to finish the device configuration.
Page 9
FAQs Why I can't add the camera to the App? 1. Make sure the camera powers on and the red and the blue lights flash alternatively to finish self-examination, then you can add the camera. 2. Connect your smartphone and the camera to the same 2.4GHz Wi-Fi network (5GHz network is not supported currently).
Page 10
3. If the problem persists, contact the support team for help. Why is the live streaming video upside down? In the blurams App, go to the device's "Preferences" and tap "Rotate 180°". If you encounter any other problems in Product Information, Product Installation and Use, please refer to the "Mine >...
Page 11
2. Try to talk closer and louder to the camera. 3. Restart the camera. Look forward to your feedback blurams strives for offering high-quality products and thoughtful user experience, and we’re eager to hear your feedback or suggestions. Feel free to send your feedback through the App or...
Page 12
Notes: 1. Please cut the power off when inserting/removing your micro SD card to ensure it can be recognized. 2. After finishing the camera setup under the 2.4GHz Wi-Fi connection for the first time, you can try to use an Ethernet cable to get a better and more stable network connection.
Page 13
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 14
Congratulations! Your camera is ready to use. Thank you for choosing blurams. blurams Facebook blurams Instagram support@blurams.com www.blurams.com...
Need help?
Do you have a question about the Outdoor Lite 3 S21C and is the answer not in the manual?
Questions and answers