1More PistonBuds PRO Q30 User Manual

成品尺寸：12*90mm
材质：80克书纸
C:0/M:85/Y:95/K:0
K:80文字需要无明显网点
封面
1MORE PistonBuds PRO Q30 User Guide
万魔活塞豆降噪 Q30 用户指南
www.1more.com
4 封底
3
Answer/Hang up: Double tap
Decline: Press and hold
Voice Assistant: Triple tap
(Bluetooth on and not in a call)
* To change a song or control volume, please set up on 1MORE MUSIC APP or operate on
paired mobile phone or device.
* Above functions are available for either earbud in individual or stereo mode. Custom
setup is available on the APP.
* Above functions may vary with different devices.
Extra Functions
1. If only one earbud can be connected to the device, please put the two earbuds back into
the case and triple tap the pairing button, then click "1MORE PistonBuds PRO Q30" in
the device pairing list to connect to your device.
2. Clear The Pairing Records:
Put both Left and Right earbuds into the case, press and hold the pairing button for 8
seconds, the pairing records will be cleared.
3. OTA Firmware Update:
It can be synchronously upgraded via the 1MORE MUSIC APP while the Left and Right
earbuds are connected to each other with at least 50% battery.
* Functions of the 1MORE MUSIC APP may vary with different devices or operating systems. For more details,
please contact our customer service.
1MORE (1) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be free from
defective materials and workmanship for a period of one year from the date of purchase if
it is properly used and maintained. If this product proves defective in either material or
workmanship, 1MORE, at its option, will (a) repair the product with new or refurbished
parts, or (b) replace the product with an equivalent new or refurbished product, at no
charge for parts or labor. If the product model is no longer available and cannot be
repaired effectively or replaced with an identical model, 1MORE at its sole option may
replace the unit with a current model of equal or greater value. In some cases, modification
to the mounting surface may be required where a new model is substituted. 1MORE
assumes no responsibility or liability for such modification. TO OBTAIN A REPAIR OR
REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE RETURN TO THE
ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT
WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN
handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the government or
local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. Please contact the installer or local
authorities for more information about the location as well as terms and conditions of such
collection points.
Your 1MORE retailer will advise you of the correct way of disposal in your country.
Tips
1. Please read this instruction manual carefully and retain for future reference.
2. Please fully charge the battery before first use.
3. If the headphones have been unused for more than 3 months, we recommend that you
charge them. This will improve battery capacity.
4. Only use chargers that are FCC (Federal Communications Commission) approved.
5. In dry environments, static electricity may numb your ear. This is not related to the
quality of the product.
Safety Information
1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to
temperatures above 113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the
headphones from working properly, and also increase your chance of being electrically
shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use the headphones in traffic. Do not use the headphones any time it
would be dangerous to be unaware of noises around you.
7. Adult supervision is required for children of age 6 and under.
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s).
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device has been tested for compliance with IC SAR values at a typical operating near
the body. To ensure that RF exposure levels below the levels tested, use accessories with
this equipment to maintain a minimum separation distance of 0 cm between the body of
the user and the device. These accessories should not contain metallic components. It is
possible that the accessories used close to the body that do not meet these requirements
are not consistent with the SAR limits and it is advisable to avoid using them.
Ce dispositif a été testé pour la conformité avec les valeurs SAR à un fonctionnement
typique près du corps. Pour assurer que les niveaux d'exposition aux radiofréquences en
deçà des niveaux testés , utiliser des accessoires avec cet équipement pour maintenir une
distance de séparation minimale de 0 cm entre le corps de l'utilisateur et l'appareil. Ces
accessoires ne doivent pas contenir des composants métalliques . Il est possible que les
accessoires utilisés près du corps qui ne répondent pas à ces exigences ne sont pas
compatibles avec les limites SAR et il est conseillé d'éviter de les utiliser.
FAQ
1. Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least
30 minutes.
2. Why the headphones cannot play music after successfully connecting to my Android
device?
Hereby, Tiinlab Corporation declares that the radio equipment type EC305 is in
compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text
of the UKCA declaration ofconformity is available at the following internet
address:www.1more.com
RF exposure information: The device has been evaluated to meet general RF exposure
requirement.
The device can be used in portable exposure condition without restriction. Radiation
Exposure Statement Power is so low that no RF exposure calculation is needed.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard (such as
catching fire, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas; and A battery subjected to
extremely low air pressure that may result in an explosion or the leakage of flammable
liquid or gas.
The symbol indicates DC voltage.
EC305
1h
=
100%
2h
=
100%
> - 80%
20% - 80%
<20%
Play/Pause: Double tap
封面背面
3 封底背面
1MORE MUSIC APP
For users outside mainland China, please download
the 1MORE MUSIC APP for product upgrades and
additional features.
* APP Ul in user guide may vary and for reference only,
please refer to Ul on device.
中國内地以外的用戶可下載1MORE MUSIC APP進行產品升級,
體驗更完整的功能。
* 說明書中的 APP 界面僅為示意， 請以實物為準。
中国内地用户可扫描二维码下载 1MORE MUSIC APP 进行
产品升级， 体验更完整的功能。
*说明书中的 APP 界面仅为示意， 请以实物为准。
制造商： 万魔声学股份有限公司
地址： 深圳市南山区留仙大道 3333 号塘朗城 A 座 35 楼
服务热线： 400-992-0909
Manufacturer: Tiinlab Corporation
Add: No. 3333, Liuxian Avenue, Tower A, 35th Floor,
Tanglang City, Nanshan District, Shenzhen, China
1
× 1
2
S
M
L
4
1 2
ANC Off ANC-Strong
The default setting of the headphones is "ANC Off", long press the touch control area of
the earbuds to switch between "ANC-Off", "ANC-Strong" and "Pass-through".
"ANC-Mild", "WNR (Wind Noise Resistance), "ANC-Adaptive" options are available via
1MORE MUSIC APP.
Once the Listening mode has been set up in the APP, they will be memorized by the
headphones allowing you to switch modes based on your settings.
Spatial Audio
1MORE Spatial Audio breaks through the limitations of devices, systems, and audio formats,
creating a more immersive and realistic listening enjoyment.
Low-Latency Gaming Mode
Turn on the gaming mode to sync up audio and video, reducing the latency to as low as
80ms.
Available via APP.
EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but not limited to a
receipt or sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail
purchaser.
Limitations:
• This limited warranty does not cover the failure of the product resulting from improper
installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or
environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or
consequential damage to other components or premises which may result for any reason
from the failure of the product.
• This limited warranty is null and void for products not used in accordance with 1MORE's
instructions.
• This limited warranty is null and void for products with altered or missing serial numbers
and for products not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another
party.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value
your satisfaction. If you would like more details on this product or any of our other
products, please visit us online by scanning the QR code. Go to www.1more.com and sign
up for VIP, and 1MORE will treat you like one.
WEEE
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment by
FCC
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types
EC305 (FCC ID: 2ASDI-EC305) has also been tested against this SAR limit.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:(1) this device may not cause
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right
of your device name and make sure the "Media Audio" option is on.
3. Why there is no sound from the headphones while making phone calls after successfully
connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right
of your device name and make sure the "Phone Audio" option is on.
4. Why the Bluetooth connection is not stable and causes some interruptions?
1) Try shortening the distance between your headphones and device. Avoid solid barriers in
between.
2) Please keep away from strong interference sources, such as Wi-Fi and GPRS.
3) Please make sure the Bluetooth antenna of your device is not blocked.
5. Why some control functions do not match those in the manual while using third party
music/video player Apps?
Your operating system and the third party music/video player apps may have different
settings for the control functions. We recommend that you use the music/video player
apps that your device has originally provided.
* For more detailed product FAQs, please visit the product support section under
www.1more.com
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the
like.
Tiinlab Corporation hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU
and all other applicable EU directive requirements. The full text of the EU
declaration of conformity is available at the following internet address:www.1more.com.
Name: Wireless Earphones
Model: EC305
Single Earbud Weight: 4.6g
Case Weight: 34.8g
Gross Weight: 44g
Earbuds Size: 21 × 26 × 29mm
Case Size: 24 X 43 X 62mm
Single Earbud Battery Capacity: 43mAh
Case Battery Capacity: 410mAh
Earbuds Charging Time: 1hour
Case Charging Time: 2hours
Frequency Band: 2.400GHz ~ 2.4835GHz
Operation Frequency/Max. EIRP: 2400-2483.5MHz, Max. EIRP is 6.93dBm.
The specifications are acquired from laboratory tested data.
* The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary with
different device setting, environments, usage and other factors.
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Tiinlab Corporation is under license. Other trademarks
and trade names are the property of their respective owners.
FCC ID:2ASDI-EC305
IC:24662-EC305
× 1
( S / M / L)
1MORE PistonBuds PRO Q30
1.5s
3
Pass-through
Playtime (ANC Off)
Earbuds Fully Charged: 7.5hours
Case and Earbuds Fully Charged: 30hours
Playtime (ANC On)
Earbuds Fully Charged: 5hours
Case and Earbuds Fully Charged: 20hours
Ω
Speaker Impedance: 16
Bluetooth Range: 10m
®
Bluetooth Version: Bluetooth 5.3
Bluetooth Protocol: HFP / A2DP / AVRCP
Input: 5V 0.5A
℃ ℃
Working Temperature: 0 ~ 45