CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never
a solvent) to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe
carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced
If the cord is damaged, the luminaire shall be destroyed
PIECE DESCRIPTION
PICTURE
mounting
A
screw
mounting
B
bracket
C
machine screw
D
wire connector
E
screwed ball
F
ground screw
G
canopy
Part List and Hardware List
Part List and Hardware List
QUANTITY PIECE DESCRIPTION
2X
H
1X
I
ring nut
2X
J
hex nut
3X
K
shade
2X
L
socket ring
1X
M
1X
PICTURE
QUANTITY
tube
4X
1X
1X
5X
5X
bulb
5X
Model#: LIT4211A
Product Dimensions: 24.5"L X 24.5"W X
68.875"H