Safavieh Lighting SUTTON LIT4218A Quick Start Manual

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe
carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced
If the cord is damaged, the luminaire shall be destroyed
PIECE DESCRIPTION PICTURE
mounting
A
bracket
B machine screw
mounting
C
screw
D wire nut
E collar loop
F canopy

Part List and Hardware List

QUANTITY PIECE DESCRIPTION
1X G
2X H fixture loop
1X I ring nut
3X J screwed ball
1X K
1X
PICTURE QUANTITY
chain
bulb
Model#: LIT4218A
Product Dimensions: 17"D X 98.5"H
1X
1X
1X
2X
6X