Advertisement
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Drill safety warnings
-
Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
NOTE the above warning applies only to impact drills and may be omitted for drills other than impact drills.
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal
-
injury.
Hold power tool by insulated gripping surfaces, when performing an operation
-
where the cutting accessory may contact hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
Additional instructions
-
Charger and battery are sold separately. Please buy recommended battery and charger.
-
The electrical current used must correspond to the specifications of the battery charger;
read carefully the instructions and technical specifications of the charger and the battery.
-
Never allow moisture, rain or splash to reach the recharging location.
-
The ambient temperature should never exceed 40 ° C. Never expose the unit to direct
sunlight.
-
A faulty or damaged battery pack or no longer accepting a load must be disposed of at a
special collection point. Respect the environment. Do not dispose of an unusable battery
pack with household waste in the fire or in water.
-
Always keep the surface of the charger free of dust and dirt.
-
Always remove the battery pack before performing any operation or maintenance on the
device.
Residual risks
Even with use of the tool as described, it is impossible to eliminate all residual risk factors. The
following hazards may be present in connection with the construction and design of the tool:
1. Pulmonary lesions if an effective mask is not worn.
2. Hearing damage if effective hearing protection is not worn.
3. Body injuries caused by vibration emissions if the electrical appliance is used improperly or
for a prolonged or poorly maintained period.
WARNING! This device produces an electromagnetic field during operation. This field may
interfere in certain circumstances with active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend that people with medical implants consult with their
physician and the medical implant manufacturer before using this device.
Intended Use
This power tool is designed for drilling as well as for tightening and loosening screws. Specially
design to work with Hyundai range of battery and charger.
This power tool should not be used for purposes other than those described.
HBA20V4A
HBA20V4A
HCH20V
20V
2A
LITHIUM
BATTERY
20V
4A
LITHIUM
BATTER
20V LITHIUM ION BATTERY
CHARGER
5
ION
NOT
INCLUDED
PACKAGE
ION
NOT
INCLUDED
PACKAGE
NOT
INCLUDED
PACKAGE
IN
IN
IN
Advertisement
