Advertisement
j.
Hammer action
This drill has the additional feature of hammer action. Rotate the torque ring until the
hammer symbol aligns with the arrow on the drill body.
k. Working clamping
To prevent the drill from spinning the workpiece if the drill bit becomes jammed in the hole
being drilled, it is recommended that a drill vice or other suitable clamp is used to secure the
workpiece during the drilling operation.
If the bit jams in the workpiece or if the drill stalls, stop the tool immediately. Remove the bit
from the workpiece and determine the reason for jamming.
Note: this drill has an electric brake. When the switch trigger is released, the chuck stops
turning. When the brake is functioning properly, sparks will be visible through the vents
slots on the housing. This is normal and is the action of the brake.
13
Advertisement
