Table of Contents
Advertisement
USER MANUAL
6. Frequently Asked Questions
VS3 grind chamber is blocked?
Check the grind setting is not in the 0-1 setting range.
Check that the burr chamber does not have any coffee beans or foreign
materials present (rocks, sticks, unroasted coffee beans), that may be stuck in
the chamber. Remove any residual beans and clean the burr chamber as per the
cleaning process in this manual.
Tip: After each grind cycle, use of bellows is recommended
– This will create
a small pressured air blast through the grinding system in order to quickly clean
any loose grounds/chaff left in the chamber. Refer 4.5 pg10.
The nut/washer is wobbling?
This is normal behaviour and is not indicative of a malfunction or problem. The
nut and washer are not part of the system that determines the concentricity of
the burrs and has zero impact on the precision or alignment of the grinder.
The hopper on my VS3 is moving while grinding?
We apply a food grade metal grease to our threads at the factory. With
continued use this can wear off and allow the thread more slip. In order to
ensure a stable and fixed thread position - please apply a food grade
grease to the threads.
15
Advertisement
Table of Contents
