Table of Contents
Advertisement
Auto Tuner Setup
In auto tuner setup, the TV automatically
scans through all available channels, memorizing
the
active ones and skipping over blank ones or channels with weak signals. This means when
you scan (using the CHANNEL+/-- buttons) you will receive only clear, active channels.
To choose CABLE or AIR or SKiP when you
skip Auto Tuner Setup)
To START
NOW
PROGRAMMING
48
Programming
will take approximately
1 to 2
minutes.
When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed
Your
quick setup is now complete.
You can now begin watching
your television, or you can
continue on in this guide for more information
on programming
your remote control, or using
the JVC onscrean menu system to customize
your television viewing expedance.
Notes:
• Noise muting will not work during Auto Tuner Setup.
• Skip appears only for interactive
plug-in menu.
• The interactive plug-in menu setting does not appear if your TV has been turned on before.
In this case, use the menu to perform these settings. See pages 40, 46 and 28.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may,
(depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner
memory.
This is normal.
The Quick Setup is complete
Advertisement
Table of Contents
