Victory FIA-1D-S7 Characteristics

FIS MODELS — FIS-1D-S7
FIS-2D-S7
Stainless steel
FIS-3D-S7
exterior and
interior.
Half D D oor, R R oll-T T hru a a nd R R emote M M odels A A vailable
Cabinet:
Each Victory cabinet is internally supported,
braced and assembled into a single rigid
unit. The cabinet front and doors are
constructed of heavy gauge polished
stainless steel to maintain an attractive
appearance after years of heavy use.
Foamed-in-place polyurethane insulation
throughout the cabinet and doors ensures
the ultimate in energy efficiency.
Doors:
The self-closing doors are securely mounted
on rugged cam-lift hinges, which have a
lifetime guarantee. Each door has a heavy-
duty cylinder lock and self-adjusting
magnetic gasket to prevent the cold air from
escaping. Humidity control wires located
around the door jamb prevent condensation
from forming on the cabinet front and are
concealed by a high impact, non-conductive
thermal breaker strip. The interior door liner
is constructed of durable ABS material,
which resists denting and scratching and is
Approvals:
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Roll-in Freezers
FISA MODELS —
Stainless steel
exterior.
Aluminum interior.
FISA-2 2 D-S S 7
easy to clean. Each safety grip handle is
guaranteed for life. Removable ramps are
provided on the bottom of each door
opening.

Refrigeration System:

All components of the self-contained
refrigeration system are mounted on top of
the cabinet. The air circulating fans and the
forced convection-cooling coil are contained
in an insulated housing separate from the
product zone allowing for maximum food
storage capacity. All condensate water is
disposed of automatically by the energy
efficient non-electric condensate evaporator,
no plumbing is required.
Project:
Location:
Item #:
Quantity:
FISA-1D-S7 FIA MODELS —
FISA-2D-S7
Stainless steel fronts
FISA-3D-S7
and doors. Aluminum
sides and interior.
FIS and FISA Models
• Digital Thermometer/Battery Back-up
FIA Models
• Dial Thermometer
Standard Features (all models)
• Energy Saver Switch
• Stainless Steel Case Front and Door(s)
• Lifetime Cam Lift Hinges
• Lifetime Safety Grip Handle(s)
• Self-Closing Doors with Safety Stops
• Adjustable Wiper Gasket(s)
• Removable Ramps(s)
• Energy Saving Thermal Breaker Strips
• Door Opening Accepts Carts up to 27"w x
29"d x 64"h
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
• High Impact ABS Interior Door Liner
• Plasticized Fin Coil
• Environmentally Friendly R-404A Refrigerant
• Non-Electric Condensate Evaporator
• Automatic Defrost
• Stainless Steel Floor
• Cord and Plug Attached on 115V Models 12
Amps or Less
Optional Features and Accessories
• Dial or Digital Thermometer
• Hinged Glass Doors with Cylinder Locks
• Change Door Swing
• Shelf Pilaster Strips
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• Stainless Steel Case Back
• Remote and Roll-Thru Models
Note: All 2 & 3 section Roll-Thru models only
have stainless steel interiors
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
FIA-1D-S7
FIA-2D-S7