Advertisement
Assembly
№
1
2
3
4
5
Installation
Make sure to remove the protective film from the front.
1.
Bring the panel to the correct position and mark the holes of the frame. Drill four holes in a wall
or ceiling using a 6-mm rotary drill. Make sure that the positions of the holes are correct.
2. Plug the dowels into the holes.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
Name
Heating layer
Aluminium frame
Insulating layer
Aluminium foil fabric
Mounting hole
Item 64390–64396
Page 6
07 2023-1
Advertisement
