Table of Contents
Advertisement
Dinner Plate
a)
Press "DINNER PLATE" repeatedly until the number you wish appears in the
display, "250", "350", "500" g will display in order.
For example, press "DINNER PLATE" once, "250" appears.
b)
Press "START/+30 SEC" to cook, buzzer sounds once. When cooking finish,
buzzer sounds five times and then turn back to waiting state.
Pizza
a)
Press "PIZZA" repeatedly until the number you wish appears in the display, "100",
"200", "400" g will display in order.
For example, press "PIZZA" once, "100" appears.
b)
Press "START/+30 SEC" to cook, buzzer sounds once. When cooking finish,
buzzer sounds five times and then turn back to waiting state.
Memory Function
1.
Press "0/MEMORY" to choose memory 1-3 procedure. They will display 1,2,3.
2.
If the procedure has been set, press "START/ +30 SEC." to use it. If not, continue
to set the procedure. Only one or two stages can be set.
3.
After finishing the setting, press "START/ +30 SEC." once to save the procedure
and turn back to the waiting states. If press "START/ +30 SEC." again, it will start
cooking.
Example: to set the following procedure as the second memory, that is memory 2. to cook
the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
1.
In waiting states, press "0/MEMORY" twice, stop pressing until the screen
displays "2".
2.
Press "TIME COOK" once, then press "3", "2", "0" in order.
3.
Press "POWER" once, "PL10" display, then press "8" and "PL8" displays.
4.
Press "START/ +30 SEC" to save the setting. Buzzer sounds once then turn back
to waiting states. If you press "START/+30SEC" twice after step 3, the procedure
will be saved as the memory 2 and operated.
5.
If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure needs to reset.
6.
If you want to run the saved procedure, in waiting states, press "0/MEMORY"
twice, screen displays "2", then press "START/+30SEC" to run.
15
Advertisement
Table of Contents
