Three-Year Limited Warranty; Troubleshooting - DeWalt DCHT820 Instruction Manual

• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.dewalt.com/account‑login.
Three‑Year Limited Warranty
For warranty terms, go to www.dewalt.com/support/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D WALT Industrial Tool Co., 701 East
e
Joppa Road, Towson, MD 21286 or call 1‑800‑4‑D
(1‑800‑433‑9258).
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country-specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑800‑4‑D
(1‑800‑433‑9258) for a free replacement.

TROUBLESHOOTING

Problem Solution
Unit will not start. • Check battery installation.
• Check battery charging requirements.
• Check that lock-off is fully pushed down prior
to moving main trigger.
Battery • Insert battery into charger until red charging
won't charge. light illuminates. Charge up to 8 hours if
battery is totally drained.
• Plug charger into a working outlet.
• Check current at receptacle by plugging in
an appliance.
• Check to see if receptacle is connected to a
light switch which turns power off when you
turn out the lights.
• Move charger and appliance to a surrounding
air temperature of above 40 °F (4.5 °C) or
below 105 °F (40.5 °C).
Slow running, noisy, • Inspect for nicks and remove if possible.
or hot blades.
• Lubricate blades.
• Bring to a D
straighten blade, blade support, or teeth.
• Tighten bolts on the blade.
WALT
e
WALT
e
WALT factory service center to
e
English
7