Vertex Standard VX-900 Operating Manual page 16

ing the Soft key. To restore a particular channel
to your scanning list, press and hold in the Soft
key again for one second; " - STOP - " will appear
on the LCD for one second after pressing the Soft
key.
Call/Reset
This feature, if enabled, allows the user to change
the 3-digit Page Call code, used to call other simi-
larly-equipped stations. Press the Dealer-assigned
Soft key, followed by the three digits represent-
ing the Page Call code of the station you wish to
call. Three tones will be heard after the last key is
pressed (the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
14
A O
DVANCED PERATION
Speed Dial
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the Dealer-assigned Soft
key for Speed Dialing, then press the numbered
key corresponding to the Auto-Dial memory num-
ber list provided by your Dealer. The DTMF tones
sent during the dialing sequence will be heard in
the speaker.
Emergency
The VX-900 includes an "Emergency" feature
which may be useful if you have someone moni-
toring on the same frequency as your transceiver's
channel. For further details contact your VER-
TEX STANDARD dealer.
VX-900 O M
U PERATING ANUAL