Table of Contents
Advertisement
Data output mode
□ Stream mode
Function setting "F5-0"
The scale outputs the current display data. The data-update rate is approximately 10
times per second. This rate is the same as the display-update.
The scale does not output data while it is in setting mode.
□ Print switch mode
Function setting "F5-2"
When the | PRINT 1 switch is pressed while the weighing data is stable (STABLE
indicator is on), the scale transmits the data.
□ Auto-print mode +/- data
Function setting "F5-3"
The scale transmits the weighing data when the display is stable (STABLE indicator
is on) and the data is more than +4d or less than -4d of weight data,
d = minimum weight display (see "12-1 Specifications")
When in counting mode, "d" is equal to minimum weight display of kg mode.
The next output can be obtained after the display returns to between -4d and +4d.
□ Auto-print mode + data
Function setting "F5-4"
The scale transmits the weighing data when the display is stable (STABLE indicator
is on) and the data is more than +4d of weight data.
d = minimum weight display (see "12-1 Specifications")
When in counting mode, "d" is equal to minimum weight display of kg mode.
The next output can be obtained after the display returns to below +4d.
□ Command mode
Function setting "F5-1
In the command mode, the scale is controlled by commands that come from the
personal computer and so on.
Command list
"Q" command
Command to request the current weighing data.
Command
Reply
"Z" command
Command
□ This command works as
and as
for U.S.A. models.
for the metric models
"T" command
Command
Same operation as the
switch.
□ This command works as
TARE
for U.S.A. models.
□ The metric models cannot accept this command.
19
Advertisement
Table of Contents
