1. Manuals
  2. Brands
  3. Sumake Manuals
  4. Lifting Systems
  5. SA-22900
  6. Instruction manual

Sumake SA-22900 Instruction Manual

Spring balancer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
SA-22900
ITEM NO.:
SPRING BALANCER (70-90KGS)
SA-221050
SPRING BALANCER (90-105KGS)
SA-221200
SPRING BALANCER (105-120KGS)
SA-22900(1050)(1200)-I-1911A-YM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SA-22900 and is the answer not in the manual?

Questions and answers

Related Manuals for Sumake SA-22900

Summary of Contents for Sumake SA-22900

  • Page 1 INSTRUCTION MANUAL SA-22900 ITEM NO.: SPRING BALANCER (70-90KGS) SA-221050 SPRING BALANCER (90-105KGS) SA-221200 SPRING BALANCER (105-120KGS) SA-22900(1050)(1200)-I-1911A-YM...

  • Page 2: Safety Instruction

    1. Safety instruction Never stand under the spring balancer. Incorrect use of the spring balancer could cause personal injury. Observe instruction in the manual and use the balancer correctly. Never put the spring balancer in fluid. Don’t twist and rub the cordage with cable during travel. Don’t load over its capacity.
  • Page 3 Take the tools off while remove the spring balancer, prevent the devise drop down.  Please remove the spring balancer and tools if rest for a long time.   Never remove device while the cable is pulled out. The rope will retract immediately and cause personal injury Large angle using will debase the wire rope's life, under ±20°...

  • Page 4: Installation

    2. Description (2.1) Specification Model No. Cable Travel (Kg) Travel (M) Weight (Kg) SA-22900 70~90 22.2 SA-221050 85~105 23.75 SA-221200 100~120 27.4 (2.2) Working condition Application area: indoor  Temperature range: -10°C ~ +50°C  (2.3) Mechanism Feature Drop prevention device: ...

  • Page 5: Check Before Using

    4. Check before using (4.1) The hanger(2) and hook(8) is stable and turn swivel . (4.2) The cable set is completed and no any damaged . (4.3) The stop pin(13) is in open position (see Fig.1) . (4.4) The appearance is no damage 5.
  • Page 6 6. Drum Lock Operation(5)(see Fig.1) (6.1) Pull the stop pin (No.13) and turn clockwise to lock position And move the tool upward or downward until drum become locked. (6.2) Move the tool again to check the drum is locked securely then remove tool from hook. Please check whether the stop pin is in lock position before removing suspended tool.

  • Page 7: Troubleshooting

    1. The cable need to be retracted totally if operator needs to replace suspended tool. 2. Please adjust spring tension according chapter 5 "Spring Tension Adjustment" when attach the new tool. 8. Troubleshooting Please stop operating if malfunction occur during operation immediately and take the necessary step to check problem.
  • Page 8 6. Check safety pin function before use: Lock drum by stop pin(5). Adjust the tension below capacity and check whether the safety pin(33) pop out or not. Meanwhile. adjust the tension back to standard capacity and check whether the safety pin move back inside the ring or not. If both yes, the balancer are available for use. If any one is not, take out the spring seat set(7) according 7.
  • Page 9 2. Please disassembly if the cable can't be release by pulling. 3. Turn stop pin at lock position(see P4 Fig.1), remove E snap (32) from worm gear. (3) (P5 Chapter 2) 4. Turn worm gear (3) counter-clockwise to release spring tension and remove it. 5.

  • Page 10: Cable Replacement

    10. Cable Replacement (10.1) 10-1 Pull the tool downward and extend the cable to Max. travel. (10.2) According Fig.5, adjust the screw (27) and turn stop pin (3) at lock position, refer to chapter 6-1.P6 (10.3) Move the tool upward and downward to make sure the drum is locked then remove tool from hook.

  • Page 11: Spring Replacement

    Four spring type: SA-22120  SA-22900, SA-221050, SA-22120 has three or four springs, so some spring tension remains even one spring broken. be careful and note when disassembly. Please refer to Chapter 6-1"Drum Lock Operation" and lock it then remove suspended tool from Hook.
  • Page 12 Turn worm by the number of turns a below after cable fully retract. Meanwhile the safety pin (33) retract. Model No. Turns SA-22900 SA-221050 SA-221200 (11.16) Install the tool which weight is in capacity of spring balancer and adjust the spring tension.
  • Page 13 12. Cable Guide Replacement (12.1) Pull out the cable which cable guide set is available to replace and lock drum by stop pin (13). (refer to Fig.8) (12.2) Confirm the stop pin at lock position by move suspended tool up and down then take it off . Never remove the suspended tool before checking Drum is locked.

  • Page 14: Ec Declaration Of Conformity

    DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： SPRING BALANCER Model/ Serial No.： SA-22900, SA-221050, SA-221200 to which this declaration applies, complies with these normative documents: ...
  • Page 15 SA22900-20 Sheath SA22900-01S SA22900-26 Bearing 23, 24, 25] SA22900-03 Worm Gear SA22900-27 Screw SA22900-04 Spindle [SA-22900] SA22900-29 Spindle Sleeve [SA-22900] SA221050-04 Spindle [SA-221050] SA221050-29 Spindle Sleeve [SA-221050] SA221200-04 Spindle [SA-221200] SA221200-29 Spindle Sleeve [SA-221200] SA22900-05 Drum [SA-22900] SA22900-30 Spring Washer...
  • Page 16 NOTE www.SUMAKE.com www.AIRCOMPRESSOR.com.tw...

This manual is also suitable for:

Sa-221050Sa-221200

Table of Contents