Table of Contents
Advertisement
2. Plug the USB data cable into the phone's USB Charger
Port (as shown in the above illustration) and the wall
adapter end into an electrical outlet.
Remove the Battery
If you need to remove your phone's battery, please
follow the procedure indicated below:
1. Insert your fingernail into the back cover slot on the
bottom of the phone and lift off the back cover (1).
2. Insert your fingernail into the slot and lift the battery
from the compartment (2).
Power On/Off Your Phone
To power on the phone, slide the phone up and
press and hold the End Key until the LCD screen
lights up.
If the handset lock code has been activated, the
phone will prompt you to enter the code. The
default lock code for an inactivated phone is 0000.
1
2
23
Advertisement
Table of Contents
