Advertisement
Note:
• The creak sound can be used as a reference to determine whether
the hearing aid is secured.
• If the hearing aid gives out squeaking, please check if it is inserted
correctly. If inserted correctly, but the squeaking remains, please
replace with the other size of ear tip. When the hearing aid is not
in use, please turn it off without delay.
• When the hearing aid is not functioning properly, please check
the "TROUBLESHOOTING" guide. If none of the solutions work,
please contact the Nuvomed Inc. Expert Care Team.
5. Turning on/off the hearing aids
Turning on the hearing aid:
The hearing aid will turn on automatically in about three (3) seconds when
it is worn correctly. You will hear prompt tone according to the hearing
program (refer to "HEARING PROGRAM CHANGE")
Turning off the hearing aids:
The hearing aid will enter the standby status automatically when it is
removed from your ear. When placed back into the correct slot of the
charging case, hearing aids will turn off and start charging automatically.
Turn On
Standby
Tum Off
6. Volume adjustment
• The hearing aid has six (6) volume levels.
• You could increase the volume by short pressing the"+" button.
• You could decrease the volume by short pressing the"- "button.
• The hearing aid will give out the prompt tone "Beep" when you
increase or decrease the volume.
• The hearing aid will give out the prompt tone "Beep-Beep-Beep" at
maximum or minimum volume.
L
-tt?1/------1
"+" button
button
11
Advertisement
