Advertisement
Quick Links
"...the CT-120 is one of the few subwoofers I've tested at any price that could
produce clean output at 20 Hz..."
- Tom Nousaine
Stereo Review, June 1998
"...it is an excellent sub..., it compares favorably with even the best...it is
definitely superior...."
- Howard Ferster
Sensible Sound, February/March 2000
Other Velodyne Subwoofer Products:
HGS Series
HGS-10
HGS-12
HGS-15
HGS-18
SPL Series
SPL-800
SPL-1000
SPL-1200
Velodyne Acoustics, Inc.
1070 Commercial St. Suite #101
San Jose, CA 95112
408.436.7270 voice
408.436.7276 fax
Web Site: www.velodyne.com
E-mail: techhelp@velodyne.com
Printed on recycled paper.
6-01, #63-CHT FRS
Rev. A
VLF Series
VLF-810
VLF-1012
F Series
FSX-12 II BV
CHT
Front Row System
Owner's Manual
Audio/Video Satellite and Surround System
Advertisement
Related Manuals for Velodyne FSX-12
Summary of Contents for Velodyne FSX-12
- Page 1 - Tom Nousaine Stereo Review, June 1998 "...it is an excellent sub..., it compares favorably with even the best...it is definitely superior..." - Howard Ferster Sensible Sound, February/March 2000 Other Velodyne Subwoofer Products: HGS Series VLF Series HGS-10 VLF-810 HGS-12...
-
Page 2: Safety First
CAUTION: To reduce the risk of electric shock, do not attempt to open or disassemble speaker cabinet. There are no user serviceable parts inside. Safety First Read instructions. All safety and operating instructions should be read before the speaker is operated. Retain instructions. -
Page 3: Troubleshooting And Service
This speaker system was designed to offer seamless integration with any of our CHT Series subwoofers. It is essential that you use a Velodyne subwoofer with the CHT Front Row System to achieve optimal performance. The addition of a Velodyne Subwoofer will allow your loudspeaker system to reproduce the bass frequencies from approximately 80Hz and below. -
Page 4: Prepare For Installation
Prepare for Installation Your new Front Row System provides for a number of installation options, especially when combined with a Velodyne subwoofer. Read all the installation information below in order to determine which installation option is best for your system. Remember to perform all installation procedures with system power turned off to prevent possible damage. - Page 5 Connection Thru Subwoofer Figure 4 illustrates how to connect your new satellite speakers through your Velodyne subwoofer's line level crossover. This is only possible if your receiver has in/out loop connections that separate the amp and pre- amp stages. Consult the manual for your receiver for further information on this capability.
- Page 6 Connection Direct From Receiver Figure 2 illustrates how to connect your Velodyne speaker system directly to your receiver or amplifier. This is the preferred connection method for most systems that have a "subwoofer out" connection and electronic filter as part of the surround sound processor. It is recommended that you activate your receiver/processor's high pass filter function.