Sony BRAVIA KDS-50A3000 Operating Instructions Manual page 36

4:3 Default Wide Zoom
Select rise:l(_iillllt scree:_
mode to .,_e,i_)r4:3 Normal
SOlIFCe,_
Full
Zoom
Off
Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of
the original image as possible.
Displays the 4:3 picture in its original aspect ratio.
Enlarges the 4:3 picture horizontally only, to fill the screen.
Enlarges the picture horizontally and vertically to fill the screen while
maintaining the aspect ratio.
Continues using the current Wide Mode setting when the channel or
input is changed.
Display Area
Screen Position
Vertical Size
• 4:3 Default is not available when Auto Wide is set to Off.
• If4:3 Default is set to anything but Off, the Wide Mode setting applies only to the
current channel. When you change channels (or inputs), Wide Mode is automatically
replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode
setting as channels and inputs are changed, set 4:3 Default to Off.
+1 Displays the entire picture with a black frame on the edge of the
screen. This setting can be selected for video signals of HDMI input.
Normal
Displays the recommended picture area.
-1/-2 Enlarges the picture to hide the edge of the picture.
Adjust the Vertical positioning by pressing t1.11!,. Press _,/* to adjust the Horizontal
positioning.
• The Screen Position feature is usefld if the TV is connected to game equipment.
Adjusts the vertical size of the picture. Press I,/,_ and press @ to adjust.
• Vertical Size is available only when Wide Mode is setto Wide Zoom or Zoom.
• It's normal to have a black frame surrounding the picture with all input t_rmats.
Auto Adjust Select Yes to start the anto adjust to display the PC input.
Reset
Resets the current screen setting to the def_mlt values.
Phase Adjust alter Pitch to fine rune overall sharpness.
Pitch Adjust uneven sharpness on screen.
• For the PC Input Signal Reference Chart, see page 15.
H Center Allows you to move the position of the picture horizontally (left and right).
To Adjust the H Center
Press tl./I!,to highlight H Center and press (_.
Press I,/,_ to correct the centering then press @.
V Center Allows you to move the position of the picture vertically (up and down).
To Adjust the V Center
Press tl./I!,to highlight V Center and press (_).
Press I,/,_ to correct the centering then press @.
36