Installing Strike Plate And Box; Physical Testing - NCTeco AL10 Series Installation Manual

Installing Strike Plate and Box

8
Make sure that the Strike Box is aligned with the latch bolt. Then, use the Installation
1)
Template to drill holes.
2)
Align the Strike Plate and Box with the drilled holes and secure them with Screw A.
2(mm)
(10/127")
depth
14(mm)
(70/127")
depth
21.5(mm)
(215/254")
35(mm)
(1-48/127")

Physical Testing

9
A.
Test the lock by rotating the
handle.
Note: When the door is locked, the front
handle can be turned, but the door will
remain locked.
Screws A
B.
Test the lock by using the
mechanical key.
Insert the Key into key hole and rotate
90°, then rotate down the handle to
open the door.
1
2
7
4
3