Sanyo LCE-32R83DT Service Manual page 14

c) Select label Config to make configuration shown as Fig. 8;
Note: I2C speed is set as about 60% commonly and should not be set too fast. If it is not easy to
connect successfully, please set I2C speed slower.
d) Select label Read, open bin file whose file path can display completely in the label Auto,
e) Select label Auto, select items Read File, Erase Device (sub-item File Area of Erase Device
had better be selected), Program and Exit ISP, then click button "Connect", a dialog shown as Fig. 9
will display if connection is successful, in which device type identified by the system automatically will
display and option "Flash_0" in the static frame "SpiFlash_X" will be ticked off. If device type or
"Flash_0" is not identified correctly, the connection is failed, then ISP tool will repeat identification
automatically until device type and "Flash_0" are identified correctly, if not, please check hardware
connection.
Fig. 7 Device configuration dialog
Fig. 8 Config configuration dialog