Table of Contents
Advertisement
English
ADJUSTING THE NAILING DEPTH
To assure that each nail penetrates to the same depth, be
sure that:
1) the air pressure to the Nailer remains constant
(requiator is installed and working properly), and
2)
the Nailer is always held firmly against the workpiece.
If nails are driven too deep or shallow into the workpiece,
adjust the nailing in the following order.
(D DISCONNECT AIR HOSE FROM NAILER.
(D If nails are driven too deep, turn the adjuster to the
shallow side.
Turn Adjuster
If nails are driven too shallow, turn the adjuster to the
deep side.
Turn Adjuster
Fiush
(D Stop turning the adjuster when a suitable position is
reached fora nailing test.
0 Connect the air hose.
ALWAYS WEAR EYE PROTECTOR.
Perform a nailing test.
® DISCONNECT AIR HOSE FROM NAILER.
® Choose a suitable position for the adjuster.
— 15 —
Advertisement
Table of Contents
