Table of Contents
Advertisement
7-7-9. Ready Level Adjustment
Adjusting method:
1) INPUT SELECT
LINE A [4_] (color bar S)
LINE B [1 _] (color bar $)
2) Press [ML] in the WIPE SELECT block.
3) Move the [MANUAL MIX] lever to LINE A.
4) Press the [LUMINANCE] and [HCENTER] buttons of
LINEA.
Adjust the Y level with the [LUMINANCE] and [H CENTER ]
buttons of LINE A, and the [A] and [V] buttons.
100%
1V£001V pp
|
Fig. 7-7.
7-7-10. Ready Y Level Balance Adjustment
Adjusting method:
1)
Press the [LUMINANCE]
and [ H CENTER | buttons of LINE
B.
2)
Move the
[MANUAL Mix]
lever to the center of the white
bar.
Set this level difference to
the minimum.
Fig. 7-8.
Adjust with the [LUMINANCE | and [H CENTER ] buttons
of LINE B, and the [A] and [V] buttons.
7-7-11. Y/C SEP Y Level Adjustment
Adjusting method:
1) INPUT SELECT
LINE A [2 ] (color bar V)
LINE B [1 | (color bar $ video output)
2) Press the f_] button in the WIPE SELECT block.
Move the | MANUAL MIX ] lever to the center of the white
bar.
3)
Press the
[5 | button.
Set this level difference to
the minimum,
L'
4) Adjust with the [A] and [V] buttons.
Fig. 7-9.
7-7-12. Y/C SEP Y Level Balance Adjustment
Adjusting method:
1) INPUT SELECT
LINE A [2 ] (color bar V)
LINE B [2 ] (color bar V)
2) Press the [[_] button in the WIPE SELECT block.
Move the [MANUAL MIX] lever to the center of the white
bar.
3)
Press the | 5 | button.
Set this level difference to
the minimum.
Fig. 7-10.
4) Adjust with the [&] and [5] buttons,
-169-
Advertisement
Table of Contents
